RARE EARTH E-Z LIFT LIFTING MAGNETS
. . . Move the biggest loads!
Applications
Use the EZ-LIFT to move plate steel, block or round steel, and iron material in your shop. Super-powerful lifting magnet requires no electricity. It's perfect for loading or unloading most workpieces including press molds, plastic molds, machined parts, etc. Rated for up to 4,400 lbs!
- Powerful magnet tested to hold OVER THREE TIMES the rated load for maximum safety
- Rated for loads up to 4,400 lbs.
- Eliminates dangerous straps and slings
- Fast, safe, efficient loading and unloading
- Call for our Application Survey to help us determine the correct model for your lifting needs.
Note: On all our lifting magnets there is a built-in safety factor of 3.3 times the rated load. This means that the safety factor is 3.3 times the maximum rated load for each magnet. All Lifting Magnets need a safety rating; do not be misled by magnets without such. WARNING: Never lift more than the maximum rated load.
Operation
Simply move the lever to the "ON" position to engage the magnet. Spring-loaded lock keeps the magnet engaged until you release it.
Lever in the "ON" position. Note the pin safety lock is engaged.
Lever in the "OFF"position.
ATTENTION: Never move the lever to the "ON" position unless the magnet is placed on an iron or steel object.
Maximum Rated Load Plate Steel |
|||
Model |
Material |
Maximum |
Minimum |
ELM-100 |
plate steel |
220 lbs. |
0.59" |
ELM-300 |
plate steel |
660 lbs. |
0.98" |
ELM-600 |
plate steel |
1,320 lbs. |
1.18" |
ELM-1000 |
plate steel |
2,200 lbs. |
1.57" |
ELM-2000 |
plate steel |
4,400 lbs. |
2.16" |
Maximum Rated Load Round Steel |
||||
Model |
Material |
Maximum |
Maximum Diameter |
Maximum Length |
ELM-100 |
round steel |
99 lbs. |
5.9" |
40" |
ELM-300 |
round steel |
300 lbs. |
9.8" |
60" |
ELM-600 |
round steel |
600 lbs. |
13.8" |
80" |
ELM-1000 |
round steel |
990 lbs. |
17.8" |
98" |
ELM-2000 |
round steel |
1980 lbs. |
21.6" |
118" |
Dimensions (inches) |
|||||||||
Model |
A |
B |
C |
D |
E |
F |
G |
H |
Wt. |
ELM-100 |
4.2" |
3.3" |
4.7" |
4.9" |
2.4" |
2.8" |
1.6" |
1.2" | 5.5 lbs. |
ELM-300 |
7.1" |
6.1" |
6.1" |
7.3" |
3.6" |
3.7" |
2.0" |
1.6" |
18.9 lbs. |
ELM-600 |
10.0" |
8.8" |
8.3" |
10.2" |
4.5" |
4.7" |
3.0" |
2.0" |
46 lbs. |
ELM-1000 |
11.0" |
9.6" |
11.3" |
14.6" |
6.5" |
6.7" |
3.8" |
3.4" |
101 lbs. |
ELM-2000 |
16.6" |
15.0" |
13.7" |
20.2" |
8.5" |
8.5" |
4.1" |
4.8" |
259 lbs. |
Lifting power depends upon carbon content of stock, stock thickness, and surface finish.
|
|||||||||||||||||||||||||
|
|
||||
|
|
||||
|
M1 |
|
|||
M2 |
|
||||
M3 |
|
||||
M4 |
|
||||
Percent of Lifting Power (by thickness of material)
| Thickness |
Depth |
ELM-100 |
ELM-300 |
ELM-600 |
ELM-1000 |
ELM-2000 |
T1 |
2.36 in |
100% |
100% |
100% |
100% |
100% |
T2 |
2.16 in |
100% |
100% |
100% |
100% |
100% |
T3 |
1.97 in |
100% |
100% |
100% |
100% |
95% |
T4 |
1.77 in |
100% |
100% |
100% |
100% |
90% |
T5 |
1.57 in |
100% |
100% |
100% |
100% |
85% |
T6 |
1.38 in |
100% |
100% |
100% |
90% |
75% |
T7 |
1.18 in |
100% |
100% |
100% |
80% |
65% |
T8 |
0.98 in |
100% |
100% |
90% |
70% |
55% |
T9 |
0.79 in |
100% |
90% |
75% |
60% |
45% |
T10 |
0.59 in |
100% |
70% |
60% |
50% |
35% |
T11 |
0.39 in |
70% |
50% |
45% |
35% |
25% |
T12 |
0.20 in |
40% |
30% |
25% |
20% |
15% |
Calculation Example: ELM-600, rated lifting power is 1,320 lbs. The formula for calculating range of lifting capacity is: T x F x M x Capacity.
T = Thickness
F = Surface Finish
M = Material
ELM-600 Example: T8, F1 and M2
90% x 125% x 85% x 1,320 = 1,263 lbs
Global Equipment Mktg. Inc.
P.O. Box 810483
Boca Raton, Florida 33481-0483
U.S.A.
Toll Free (866) 750-8662
Fax: +1 (561) 750-9507
E-mail: info@globalmagnetics.com
