Serving All Industries with Quality & Innovative
World Class Magnetic Systems & Separators

RARE EARTH E-Z LIFT LIFTING MAGNETS

. . . Move the biggest loads!

EZ-LIFT Lifting Magnet lifting a large metal pipe

Applications
Use the EZ-LIFT to move plate steel, block or round steel, and iron material in your shop. Super-powerful lifting magnet requires no electricity. Itís perfect for loading or unloading most workpieces including press molds, plastic molds, machined parts, etc. Rated for up to 4,400 lbs!

  • Powerful magnet tested to hold OVER THREE TIMES the rated load for maximum safety
  • Rated for loads up to 4,400 lbs.
  • Eliminates dangerous straps and slings
  • Fast, safe, efficient loading and unloading
  • Call for our Application Survey to help us determine the correct model for your lifting needs.

EZ-LIFT Lifting Magnets

Note: On all our lifting magnets there is a built-in safety factor of 3.3 times the rated load. This means that the safety factor is 3.3 times the maximum rated load for each magnet. All Lifting Magnets need a safety rating; do not be misled by magnets without such. WARNING: Never lift more than the maximum rated load.


Operation
Simply move the lever to the "ON" position to engage the magnet. Spring-loaded lock keeps the magnet engaged until you release it.

Lifting Magnet ON

Lever in the "ON" position. Note the pin safety lock is engaged.

 

Lifting Magnet OFF

Lever in the "OFF"position.

ATTENTION: Never move the lever to the "ON" position unless the magnet is placed on an iron or steel object.

Maximum Rated Load Plate Steel

Model

Material

Maximum
Rated Load

Minimum
Thickness

ELM-100

plate steel

220 lbs.

0.59"

ELM-300

plate steel

660 lbs.

0.98"

ELM-600

plate steel

1,320 lbs.

1.18"

ELM-1000

plate steel

2,200 lbs.

1.57"

ELM-2000

plate steel

4,400 lbs.

2.16"

 

Maximum Rated Load Round Steel

Model

Material

Maximum
Rated Load

Maximum Diameter

Maximum Length

ELM-100

round steel

99 lbs.

5.9"

40"

ELM-300

round steel

300 lbs.

9.8"

60"

ELM-600

round steel

600 lbs.

13.8"

80"

ELM-1000

round steel

990 lbs.

17.8"

98"

ELM-2000

round steel

1980 lbs.

21.6"

118"

 

Dimensions (inches)

Model

A

B

C

D

E

F

G

H

Wt.

ELM-100

4.2"

3.3"

4.7"

4.9"

2.4"

2.8"

1.6"

1.2"

5.5 lbs.

ELM-300

7.1"

6.1"

6.1"

7.3"

3.6"

3.7"

2.0"

1.6"

18.9 lbs.

ELM-600

10.0"

8.8"

8.3"

10.2"

4.5"

4.7"

3.0"

2.0"

46 lbs.

ELM-1000

11.0"

9.6"

11.3"

14.6"

6.5"

6.7"

3.8"

3.4"

101 lbs.

ELM-2000

16.6"

15.0"

13.7"

20.2"

8.5"

8.5"

4.1"

4.8"

259 lbs.

 

Lifting Magnets
Lifting power depends upon carbon content of stock, stock thickness, and surface finish.

 

clip

 

0%

50%

100%

clip

M1

Low Carbon

100%

M2

Moderate Carbon

85%

M3

High Carbon

75%

M4

Cast Iron

70%

 


 

clip

 

0%

50%

100%

150%

clip

M1

clipGround Surface

125%

M2

clipRough Machined

100%

M3

clipFoundry Finish

90%

M4

~ Rough Cast

65%

 

Percent of Lifting Power (by thickness of material)

Thickness

Depth

ELM-100

ELM-300

ELM-600

ELM-1000

ELM-2000

T1

2.36 in

100%

100%

100%

100%

100%

T2

2.16 in

100%

100%

100%

100%

100%

T3

1.97 in

100%

100%

100%

100%

95%

T4

1.77 in

100%

100%

100%

100%

90%

T5

1.57 in

100%

100%

100%

100%

85%

T6

1.38 in

100%

100%

100%

90%

75%

T7

1.18 in

100%

100%

100%

80%

65%

T8

0.98 in

100%

100%

90%

70%

55%

T9

0.79 in

100%

90%

75%

60%

45%

T10

0.59 in

100%

70%

60%

50%

35%

T11

0.39 in

70%

50%

45%

35%

25%

T12

0.20 in

40%

30%

25%

20%

15%

Calculation Example: ELM-600, rated lifting power is 1,320 lbs. The formula for calculating range of lifting capacity is: T x F x M x Capacity.
T = Thickness
F = Surface Finish
M = Material

ELM-600 Example: T8, F1 and M2
90% x 125% x 85% x 1,320 = 1,263 lbs

 

| top |

Industrial Magnets | Self-Cleaning Magnets | Eddy Current Separators


BUNTING MAGNETICS CO.
P.O. Box 468
Newton, Kansas 67114

Rich Evangelista
316-288-3759 * 800-835-2526 x210
E-mail: revangelista@buntingmagnetics.com

 

Copyright 1993 - 2017 © GEM Magnetics Division. All rights reserved.